One system, several applications
Advise on paddocks, turnout areas, access paths and suitable riding-arena constructions with one modular product.
For your specialist product range
INB® System slab
Ground reinforcement for paddocks, pathways and demanding outdoor areas.
- One system, several applications
- Choose the right side
- Plan flexible areas
ApplicationsPaddocks, turnout areas, paths, landscaping and suitable riding-arena constructions.
Ground conditions and use determine the base and drainage. Heavy-duty areas require a load-bearing substructure.
Dealer pricing and ordering are available in the protected dealer portal after approval.
Schematic principle. Not to scale; no measured or rated load values.
Product and benefits
Offer your customers a modular recycled-plastic ground reinforcement system. Two usable sides and interlocking connections support a range of equestrian and outdoor applications.
Choose the right side
Use the textured side for reinforced surfaces and the open side for filled constructions, arena bases and grassed areas.
Plan flexible areas
Interlocking and overlapping edges connect the slabs. Areas can be extended or lifted when requirements change.
Product facts at a glance
- Material
- 100% recycled PE and PP plastic
- Dimensions
- 50 × 50 × 5.3 cm
- Coverage
- 4 slabs per m²
- Weight
- Approx. 7 kg per slab
- Pallet unit
- 140 slabs / 35 m²
Getting the construction right
Which customer projects?
For paddocks, turnout areas, paths, landscaping and suitable riding-arena constructions. Intended use, traffic loads and ground conditions determine the right design.
Ground preparation, infill and drainage must suit the site. Installation without a conventional sub-base is not appropriate for every soil or load. Load-bearing capacity tested for SLW 60. Heavy-duty applications require a suitably load-bearing substructure.
These details support product selection. The final construction must suit the site, ground conditions and intended use.
Frequently asked product questions
Can slabs be laid directly on natural ground?
Depending on the ground and normal use, installation without a conventional sub-base may be possible. Preparation, levelness, drainage and the recommended covering still need assessment. Heavy-duty surfaces require a load-bearing substructure.
Which side faces upwards?
It depends on the construction. The textured side is used for reinforced areas; the open side can be used for filled arena constructions and grassed surfaces. Follow the installation guidance for the specific project.
Is this the same as the PVC arena slab?
No. The INB® System slab is made from PE/PP and measures 50 × 50 × 5.3 cm. The separate riding and exercise area slab uses recycled PVC and has different dimensions and installation requirements.