Keep layers separated
The slab creates a separation layer between the riding surface and the sub-base, helping keep the footing apart from the underlying construction.
For your specialist product range
INB riding arena slab
A stable separation layer for riding-arena construction.
- Keep layers separated
- Distribute loads
- Plan water management
ApplicationsRiding arenas, indoor schools, lunging circles, exercise areas and suitable horse walkers.
Use only with suitable footing. A load-bearing base, drainage and perimeter edging are required.
Dealer pricing and ordering are available in the protected dealer portal after approval.
Schematic principle. Not to scale; no measured or rated load values.
Product and benefits
INB riding and exercise area slabs separate the footing from the sub-base. Add a dedicated construction component for new arenas and refurbishment projects to your range.
Distribute loads
The connected slab system spreads loads across the surface and supports a consistent arena construction.
Plan water management
Perforations support water drainage. Drainage and the sub-base must be designed as a complete system.
Product facts at a glance
- Material
- Recycled PVC, black
- Dimensions
- 117 × 83 × 3 cm
- Area per slab
- Approx. 0.971 m² before cutting
- Weight
- 16.5 kg per slab
- Pallet unit
- 50 slabs / approx. 48.6 m² before cutting
Getting the construction right
Which customer projects?
For riding arenas, indoor schools, lunging circles, exercise areas and suitable horse walkers. A construction component for new facilities and refurbishment of existing riding surfaces.
The slabs must be covered by suitable footing. The level load-bearing base, drainage and stable perimeter edging must suit the site. The exposed slab surface is not a finished horse-riding surface.
These details support product selection. The final construction must suit the site, ground conditions and intended use.
Frequently asked product questions
Can horses be ridden directly on the slabs?
No. The slabs must be covered by suitable footing of sufficient depth. Material and construction depend on the intended use, discipline and site.
How much area does a pallet cover?
Each 117 × 83 cm slab covers approximately 0.971 m². A pallet of 50 slabs covers about 48.6 m² before cutting. Allow separately for edges and cut sections.
Can the slabs be installed without a sub-base?
A level, load-bearing and adequately drained construction is required. Installation guidance covers the base layer, possible levelling layer and perimeter edging. Requirements for the PE/PP System slab must not be transferred to this PVC product.